Supacell LED started out as a concept – a top performing LED light bulb that will change standards in the lighting industry as we know them.
We implemented this by using only the latest technology on the market – this allowed us to develop premium products that provide the best quality light and an extended life.
The A+Smart LED technology ensures that the light bulbs come with a 3 year guarantee and +30K hours of life. With an average use of 3-4 hours per day, that means 25 years!
In order to have as much light as possible, as well as great stability against electricity variations, LED light bulbs need a large chip. Supacell LED products are developed using the latest innovations on the market – the A+ Smart LED technology. This chip is one of the best ones in the industry at the moment, bringing the promise for an extended life and better, brighter light.
In addition to that, this technology ensures that the light bulbs provide up to 90% energy savings compared to the classic incandescent ones.
90% of the success rate of a LED bulb depends on the driver it has incorporated. For Supacell LED, we have patented a special driver – this means no other manufacturer in the market is currently using it.
Our lighting specialists developed the ACD driver – this consists of a unique technology that allows the light bulb to turn on and off for at least 15,000 times throughout its lifetime. In addition to that, it ensures an enhanced heat resistance and contributes to the light bulb’s overall extended life.
An important factor in creating high quality light is the fluorescent powder inside the bulb. By using high quality phosphor, we ensure that the bulbs will emit the same shade of white in an even manner. In other words, colours will be reflected truly and naturally. This performance is measured by CRI – the colour rendering index. The components used in Supacell LED Lighting Products ensure that a high CRI value is achieved throughout the range. With a score of 83+ CRI, Supacell LED sets itself as one of the best LED bulbs on the market.
SDCM (Standard Deviation Colour Matching) – is recognized measurement of how colour can change under different lighting conditions & is measured in steps. A1 step measurement defines a zone in which the human eye cannot tell any difference. Colours reflected under a light source with a step measurement of 3 will look different to the human eye than they would when viewed in natural light.
The SDCM technology used in Supacell LED lights, bulbs & spots ensures that the colours are reflected truly & naturally for the entirety of the lamp life, whilst other brands lamp colours start to deviate after just a few weeks.
Power Factor defines how much power is wasted by the bulb & calculated as the ratio of real power consumed by a load (expressed in Watts) to apparent power (expressed in VA). PF values of less than 1 use more power. PF with a value closest to 1 are the most efficient.
Supacell LED use the latest AC driver & Aluminum heat sink technology which enables our LED to have good power and less energy loss.
Supacell have invested in a high-end testing facilities where many tests are carried out to insure that our consumers receive long lasting LED bulbs.
Supacell LED dimmable series have a special driver which ensures higher performance & an extended life.
Our supplier, NXP, is currently one of the largest non-memory semiconductor supplier globally & the leading semiconductor supplier for the Secure Identification, Automotive & Digital Networking industries, making it the obvious choice for developing premium products.
